---
title: Module planning & organizers
description: >-
  Plan which modules run in each study period, assign organizers, and use the
  bulk actions to change course access, open SmartPlan, move modules, connect
  courses, or archive and remove planning rows.
sidebar:
  order: 3
  label: Plan module course load
---

**Module planning** determines when each module in a study program's curriculum is offered and who is responsible for running it. It is the operational bridge between the academic blueprint (modules and curricula) and term-by-term delivery: you place module versions into [Chronology](/docs/fuxam-web/cms/academic-structure/chronology) terms, then attach organizers so staffing and course access have a clear owner.

Planning is done within a cohort's **Module Planning** section, from a study program version's **Module Planning** view, or from the institution-wide **Planning** page under Management.

## Why it matters

Universities rarely deliver an entire curriculum at once. Each term, academic planners decide which units run for which intakes, who owns them, and how that maps to rooms, courses, and exams later. Without a shared planning layer:

- Curriculum modules never land in a concrete semester map.
- Staffing decisions live in spreadsheets that drift from Campus Management.
- Monitoring cannot see teaching load against quotas.
- Course linking and organizer-only visibility lack a planned offering to attach to.

Module planning gives one place to answer *what runs this term* and *who is responsible* before schedules and enrollments harden.

:::tip
Finish curriculum assignment for the cohort before heavy planning. Modules in the planning view come from the cohort's assigned curriculum — an incomplete curriculum produces an incomplete plan.
:::

## Key concepts

| Term | Meaning |
|---|---|
| **Planned module** | A curriculum module version placed into a specific academic term for a program or cohort |
| **Term** | An organization study period from Chronology (for example, Winter Semester 2025/26) used as the planning time axis |
| **Organizer** | Staff member responsible for a module — **primary** and optionally **secondary** |
| **Workload allocation** | How much of the module's workload is assigned to each organizer |
| **Scope warning** | Informational alert when an organizer's total assigned workload exceeds their configured scope |
| **Source** | Why a module appears in a study period's table: **Demand** (students have it in their study plans for that period), **Curriculum** (it's in a cohort curriculum assigned to that period) or **Offered** (a live planning row exists, even without demand or curriculum). Several sources can apply at once. |
| **Status** | The planning status of a row: **Not planned**, **In planning**, **Planned** or **Archived** |

## Open module planning

You can access planning in two main ways:

- **Institution-wide** — go to **Campus Management → Planning** to see all modules being planned across the institution.
- **Per cohort** — open a study program's cohort and select the **Module Planning** tab to plan just for that cohort.

You can also open **Module Planning** on a study program version for program-scoped planning. The same term grouping and organizer concepts apply at every level; only the filter scope changes.

## Plan a module

Use this flow when placing a curriculum module into a concrete term.

1. In the module planning view, locate the module you want to plan. Modules come from the cohort's assigned curriculum.

2. Select a **term** for the module — the academic term in which it will be offered. Terms are configured in [Chronology](/docs/fuxam-web/cms/academic-structure/chronology).

3. Save the planning assignment. The module now appears in the selected term.

:::note
The planning table groups rows by study period. The checkbox in a group's header selects every row of that study period. Rows without a term are grouped under **No study period**; treat that as a signal to finish term placement so filters and monitoring stay meaningful. For how term names, grouping and moves behave in the planning table, see [Term effects on planning](/docs/fuxam-web/cms/academic-structure/chronology/term-effects-on-planning).
:::

## Assign organizers

An **organizer** is the staff member responsible for a module. You can assign a **primary** responsible person and one or more **secondary** responsible persons. For the full Available Organizers dialog, conflict resolution, and visibility rules, see [Assign a module organizer](/docs/fuxam-web/cms/programs-and-planning/assign-a-module-organizer).

1. Open the planned module and select **Assign organizers** or open the **Available Organizers** dialog.

2. In the dialog, search for and select the **primary responsible** person.

3. Optionally, add one or more **secondary responsible** persons.

4. Set the **workload allocation** for each organizer — this records how much of the module's workload is assigned to each person.

5. Review the **scope warnings**. If an organizer's total assigned workload exceeds their configured scope, Fuxam displays a warning so you can adjust allocations before saving.

6. Save the organizer assignments.

:::info
Scope-exceeded warnings are informational. You can still save the assignment, but the warning indicates the organizer may be overloaded relative to their contracted capacity.
:::

## Change course access for several modules at once

When you select rows in the planning table, a **Status** button appears above it. It changes the access of every course connected to the selected modules and terms in one go, including their cohort and individual connections. Planning statuses stay as they are. For what each access status means, see [Manage course load for a planned module](/docs/fuxam-web/cms/programs-and-planning/course-load-management).

:::info
You need edit permission for every selected module. Otherwise the **Status** button is greyed out and its hover text says "You need edit permission for every selected module." The button isn't shown while you're looking at archived rows.
:::

1. Open **Campus Management → Planning**, or the **Module Planning** tab of a cohort.

2. Tick the modules or submodules whose courses you want to change. You can select up to 200 modules at a time.

3. Select **Status** and pick the new access: **No Access**, **Organizers Only**, **Open for self-enrollment** or **Full Access**. **Role after completion** only shows up when every selected offering can take it.

4. Read the summary in the dialog. It tells you how many distinct courses the change covers, how many selected modules have no connected course, and how many selected standalone course rows will be skipped (only courses connected to the selected modules are updated).

5. Confirm with **Grant access** when you give more access, or **Reduce access** when you take access away. If your institution has connected integrations, the reduce dialog lists them under **Affected integrations**, because enrolled users can be removed there too, for example unenrolled from the LMS course.

6. Check the message that appears, for example "Updated offerings: 12. Offerings with no role conversion: 0."

:::note
**Role after completion** is a final step. It converts each enrolled user's role to the target in the course's role-after-completion mapping, and the access status can't be changed back afterwards. In the **Apply completion roles now?** dialog, type the number of course offerings shown to confirm, then select **Apply roles**. If one offering fails, the earlier conversions stay applied.
:::

| Symptom | Likely cause | What to try |
|---|---|---|
| **Status** is greyed out | You can't edit at least one selected module | Deselect those modules, or ask an admin for edit permission |
| "Select at least one module or submodule to change connected-course access." | Only standalone course rows are selected | Select the modules; standalone course rows are always skipped |
| "Please first assign roles to all organizers in the organizer dialog before changing the status." | An organizer of a connected course has no role yet | Give every organizer a role in the organizer dialog, then try again |
| "Role after completion is a terminal status. It cannot be changed to any other access status." | A selected course is already at **Role after completion** | Deselect that module |
| "Bulk role conversion is unavailable when a course has no study period, spans multiple cohorts, or shares a connection across selected modules." | One of the selected offerings can't be converted in bulk | Change those offerings one by one under Connected Courses |
| "Set up the missing role mappings before applying Role after completion." | A connected course has no role-after-completion mapping | Set up the mapping for that course first |
| "The operation stopped before all offerings were processed." | One offering failed partway through | Earlier changes stay applied; review the refreshed list and run it again for the rest |

## Open several modules in SmartPlan at once

The **SmartPlan** button above the planning table opens the courses connected to your selected modules together in SmartPlan, so you can plan their appointments side by side. The button isn't shown while you're looking at archived rows.

1. Open **Campus Management → Planning**, or the **Module Planning** tab of a cohort.

2. Tick the modules or submodules you want to plan. They must all be in the same study period, and you can select up to 200 at a time.

3. Select **SmartPlan**. A dialog lists every connected course once, even if several selected modules share it, with all courses ticked. It also tells you how many selected modules have no connected course and how many standalone course rows are skipped.

4. Untick any course you don't need, or use **Select all courses**, then select **SmartPlan** in the dialog. SmartPlan opens in week view with the chosen courses.

| Symptom | Likely cause | What to try |
|---|---|---|
| **SmartPlan** is greyed out with "Select modules from the same study period." | The selection spans more than one study period | Select modules from one study period only |
| **SmartPlan** is greyed out with "Select up to 200 modules at a time." | More than 200 modules are selected | Split the selection |
| **SmartPlan** is greyed out with "Select at least one module." | Only standalone course rows are selected | Select the modules as well; standalone course rows are always skipped |
| "Unable to load courses. Check your selection and permissions." | You can't see at least one selected module, cohort or connected course | Select **Retry**, or deselect those modules and ask an admin for access |
| "No connected courses are available for this selection." | None of the selected modules has a connected course yet | Connect courses first in [Manage course load for a planned module](/docs/fuxam-web/cms/programs-and-planning/course-load-management) |

## Move modules to another study period

**Move** above the planning table shifts the selected modules to another study period in the study plans of the affected students.

1. Open **Campus Management → Planning**, or the **Module Planning** tab of a cohort.

2. Tick the modules you want to move. **Move** only appears when your selection includes at least one parent module, not just submodules or standalone course rows.

3. Select **Move** and pick the target in **Select target semester**. Each study period shows its start and end month.

4. Read the confirmation **Move Module(s) to …?**. It tells you how many students' study plans will be updated and lists the **Module(s) to move**. If students already have exam data in the current study period, such as grades, submissions or withdrawals, the dialog is titled **Exam data stays in …** instead: that exam stays in the old study period as a historical record and isn't moved.

5. Type **move modules** in the confirmation field, then select **Confirm** (or **Move module(s) to …** when exam data stays behind). Fuxam shows "Module(s) moved successfully".

:::warning
A move changes the study plans of every affected student. Check the student count in the confirmation before you type the confirmation text.
:::

## Connect one course to several modules

1. Tick the modules in the planning table.

2. Select **Course** above the table.

3. Choose **Create Course** to create a new course for each selected module and study period, or **Select Course** to search for an existing course and connect it to all selected modules.

4. If the course you picked already has its own standalone plan in this study period, Fuxam asks **Move standalone course into this module?**. Select **Move and connect**. The standalone planning rows are archived, while the courses, appointments, organizers and access data stay available through the module.

5. Check the message. "Course attached to some modules. Some attachments failed." means only part of the selection was connected; review the rows and try the rest again.

## Archive, restore or remove a planning row

Use **More Options** (⋯) next to the buttons above the table.

| Action | How | What happens |
|---|---|---|
| **Archive planning row** | Tick the rows, then ⋯ → **Archive planning row (n)** and confirm | The rows are archived in their study-period group. Archiving a parent module also archives its submodule rows in the same group, and if the same module is a submodule of other parent modules in that group, those placements share the row and are archived too. Other study periods, student demand, curriculum membership, connected courses and enrollments stay unchanged. |
| **Unarchive** | Open the table's view options, turn on **Show only archived**, tick the rows, then ⋯ → **Unarchive (n)** and confirm | Fuxam creates a new **Not planned** row for that study period. The archived history stays unchanged. |
| **Remove offering** | Tick exactly one row whose source is **Offered**, then ⋯ → **Remove offering** | Fuxam first shows the impact in **Remove … from the plan?**: how many course bookings of how many students are removed, how many courses are affected (their appointments are kept) and how many protected enrollments and out-of-scope bookings are kept. Select **Remove offering** to confirm; you then see "Offering removed from the active plan." |

:::note
If the confirm button reads **Removal unavailable**, the current booking records don't identify the exact module connection, so booking access can't be removed safely yet. The offering stays unchanged.
:::

## Adjust or remove planning

To change a module's planned term or organizer, reopen the module in the planning view, make your changes, and save. To take a module out of the active plan, archive its planning row or remove the offering, as described in **Archive, restore or remove a planning row** above.

After changes that affect load or quotas, return to [Planning monitoring](/docs/fuxam-web/cms/programs-and-planning/planning-monitoring) and refresh data so charts and targets reflect the new plan.

## Best practices

- **Plan from the curriculum outward** — confirm the cohort's curriculum and module versions before assigning terms and organizers.
- **Keep Chronology stable during peak planning** — renaming or reshaping terms mid-cycle confuses grids; coordinate term edits with planners (see [term effects on planning](/docs/fuxam-web/cms/academic-structure/chronology/term-effects-on-planning)).
- **Assign a clear primary organizer** — secondary organizers help with coverage, but one primary owner keeps accountability clear for course access and follow-up.
- **Treat rows under No study period as backlog** — clear them before the term starts so monitoring and course planning are not working from incomplete data.
- **Reconcile with rooms and courses after the academic map is set** — place modules and organizers first, then attach delivery courses and room bookings.

## Common pitfalls

| Symptom | Likely cause | What to try |
|---|---|---|
| Expected module missing from planning | Curriculum not assigned, or wrong module version on the curriculum | Check [cohort curriculum](/docs/fuxam-web/cms/programs-and-planning/study-programs-cohorts) and [curricula](/docs/fuxam-web/cms/academic-structure/curricula) |
| No useful term selector / empty groups | Terms not created or inactive in Chronology | Create or edit terms in [Chronology](/docs/fuxam-web/cms/academic-structure/chronology) |
| Scope warnings on many organizers | Allocations exceed configured scopes for the term | Reduce workload shares or redistribute secondary roles before finalizing |
| Monitoring numbers look wrong after planning | Data not refreshed, or quotas not configured | Refresh in [Planning monitoring](/docs/fuxam-web/cms/programs-and-planning/planning-monitoring); confirm scopes and quotas settings |

## FAQ

**Is institution-wide Planning different from cohort Module Planning?**

Same concepts, different scope. Institution-wide **Campus Management → Planning** shows modules across the institution. Cohort **Module Planning** filters to that intake. Use the institution view for cross-program staffing; use the cohort view when building one intake's semester map.

**Do I have to assign organizers when I plan a term?**

You can place a module into a term first and assign organizers later. Complete organizer assignment before you rely on organizer-only course visibility or quota monitoring, because those flows depend on who is attached and how workload is allocated.

**Where do the modules in the planning list come from?**

Mainly from cohort curricula and students' study plans; the **Source** column shows **Curriculum** or **Demand**. You can also add catalog modules or courses as explicit planning offerings with **Add to plan**; those rows show **Offered**. Manage the catalog in [Modules](/docs/fuxam-web/cms/academic-structure/modules) and the blueprint in [Curricula](/docs/fuxam-web/cms/academic-structure/curricula).

**Why is a module missing from the planning list?**

By default the list hides modules that have no users. Open **View Options** and switch on **Show modules with no users** to see them.

## Related pages

**[Assign a module organizer](/docs/fuxam-web/cms/programs-and-planning/assign-a-module-organizer)**

Available Organizers dialog, conflicts, and visibility.

**[Planning monitoring](/docs/fuxam-web/cms/programs-and-planning/planning-monitoring)**

Quota targets and teaching-load overview.

**[Study programs and cohorts](/docs/fuxam-web/cms/programs-and-planning/study-programs-cohorts)**

Cohorts and curricula that supply modules to plan.

**[Chronology](/docs/fuxam-web/cms/academic-structure/chronology)**

Academic terms you select when planning modules.

**[Modules](/docs/fuxam-web/cms/academic-structure/modules)**

Module versions referenced in planning.

**[Rooms](/docs/fuxam-web/cms/academic-structure/rooms)**

Spaces used when planned offerings become appointments.
